7/21/16 Upper Columbia Summer Chinook Fishing Report

We continue to have a great season chasing Summer Chinook on the Upper Columbia River.  Today as well as the past few days our fish came trolling Superbaits behind Pro Troll and Leo Flashers.   We got bit on three separate Superbaits today as well as a #5 copper custom spinner. Our winner Superbaits today were “Hotter Tomale” and “Rotten Banana” in the original series and the “Seahawk” in the cut plug miny 3.0.  We have been stuffing our Superbaits with canned tuna packed in oil.  We are often mixing our tuna with various scents such as Super Dipping Sauce, but today all but 2 of our bites came on tuna directly from the can.  For a great video of how we rig our Superbaits Click Here

We had a very good bite going this morning that really tapered off after the sun got high on the water, so if you are looking for success start early in the morning and fish hard until noon or so.

I still have dates open for this great Summer Fishery.  July 26-31st are completely open for full boats.  After the end of July I head out to the Oregon Coast at Astoria for Fall Chinook and Coho at the mouth of the Columbia River near Bouy 10. We still have available dates in Astoria as well so get in touch with us now and book your next salmon fishing trip.

Also don’t forget to sign up for our free newsletter and enter yourself for a chance at a free fishing trip with us! Click Here to enter!

20160721_131858

7/10/16 Upper Columbia Summer Chinook Fishing Report

Upper Columbia Summer Chinook

Fishing for Summer Chinook continues to be good on the Upper Columbia River.  Today we fished out of Chelan Falls near the Beebe Bridge. This is a great area for Chinook as there are a lot of hatchery fish to be found because of the releases into the Chelan River. We hooked a total of 5 fish today. Our hookups came on both Superbaits and Flashers and a custom copper spinner.  Our winning superbait colors today were “Rotten Banana” in the original series, and “Signal Light” in the cut plug miny.  We stuff our Superbaits with tuna mixed with a few of the Super Dipping Sauces. Today’s hot scent was the Anis / Krill.

Our highlight of the day was this 25 pound Chinook that absolutely crushed our gear and ran off 200′ off the line counter.

20160713_113742

20160713_063141

We still have openings over the next two weeks!  Get in touch with us now to book your Summer Salmon Fishing trips!  Click here for more information

Also don’t forget to sign up for our free trip drawing. We will select a random winner from our newsletter list each month. Click here to enter your chance to win!

Upper Columbia Summer Chinook Trip Photos

I just wanted to take this chance to share with everyone some great photos some customers of my took the other day on one of our summer Chinook fishing trips.  We had a great time on the water and as the photos show this is a great experience!  Hope you enjoy

How To Fish Columbia River Sockeye

Brewster Sockeye

The month of July often finds us fishing the Upper Columbia River in the Brewster Pool for Sockeye Salmon. Columbia River Sockeye Salmon average between 19-24 inches. What they lack in size they more than make up on the dinner table. Columbia River Sockeye Salmon are some of the finest tasting fish that swim in the Columbia River, and at times they can also provide outstanding fishing action. When Sockeye action is good quick limits of delicious fish are the norm! While these fish may seem easier to catch than their larger Chinook cousins, there are some specific tackle rigging and fishing differences that separate the guys that catch some from the guys who “Smack Em.” This article is designed to give you the information and gear selection that we use in our professional guide business to put consistent catches of Sockeye in our boats day in and day out. There are as many different set up as there are anglers out there, and this is not an end all be all approach to fishing Columbia River Sockeye, but simply our method for putting our customers on fish. Keep in mind that we live by the “keep it simple” approach and find that by not over complicating our rigging and gear we are able to focus more on actually putting our boats in the best position possible to catch fish.

Set up

Rods: Gloomis E6X  1143-2C STR This is a great 9’6″ casting rod that also doubles as our preferred steelhead plug rod in the Sled.  The little bit longer length gives us a little more spread in our set up.

Reels: Shimano Tekota 300 LC

Line: 25# Mono

Our set up starts by running the 25# mono through a sinker slider followed by a small bead to act as a bumper between the slider and the knot.

We tie this off to a 6 ball bead-chain swivel.

Attach a duo lock snap to the bead-chain so that the open end is toward to terminal gear ( this makes breaking down, and storing rods easier)

For the dodger lead we use 40# mono with a barrel swivel on one end and a Duo Lock Snap on the other.  We like our dodger leads to be 36″ long.

For Dodgers we mostly use the 8″ Double D Dodger from Mack’s Lures or the 11″ Sling Blade dodger from Shasta Tackle,.  Attached to our dodgers we run 8-24 inches of 40# mono for our leader.  The reason for the very heavy mono leader is that we want to be able to impart as much action as possible to our lure from the dodger and the heavy line helps this.  Also these fish tend to twist and spin an awful lot and when you are into 30/ day its nice to know you don’t need to check your leaders for abrasion.  We just re bait and drop em back out.

On the business end of our leaders we run two different set ups.  The first includes a .8 inch Mack’s Smile blade, 2 4mm beads, and a #4 Gamakatsu 2x strong red treble hook.  The addition of the single treble hook increased out hook to land ratio from a dismal 30-40% to almost 85%.  Its been that effective.  The other leader set up we use is just the same leader to nothing more that a #4 treble hook.  On both of these setups we bait up with coon shrimp.  To learn how we cure our coon shrimp click here .  We find that some days the fish want the rig with the Smile Blade and other days they just want the plain coon shrimp, but no matter what the main key to this is our coon shrimp.

To watch a video on how we set up our gear Click Here

 

Fishing

When fishing this set up in the Brewster Pool we troll at a speed between .8 and 1.4 MPH on our GPS.  This is pretty much going as slow as we can go.  Keep in mind that when trolling with the current you will carry a little more speed since the current is helping to push you along.  One trick we use is to really watch that speed and vary how fast we are going by kicking the throttle in and out of gear.  This also imparts a slight jigging action to our terminal gear.

The depths we fish vary between 8-30 feet.  To figure out where the fish are we pay close attention to our sonar and stagger our depths until we find the fish.  We commonly fish our set up between 12 – 30 feet on our line counter reels.  One tip I would like to share is that when you find some fish stay on them.

As in many salmon fisheries Brewster can be a very busy place.  If you are expecting a quiet fishing experience with few other people around then this is not your type of fishery.  Please have patience and when things get crowded and busy just remember that we are all out there for the same reason.  This is a place that I love to fish and I know many others do a well, if we are able to keep a cooler head out there it makes it much more enjoyable for everyone.

Make sure your enter for your chance at winning one of our monthly free trip drawings!  We randomly select a person every month for a free fishing trip with us.  The only thing you need to do is sign up for our newsletter and you are entered!

How to Cure Coon Shrimp for Steelhead and Salmon Fishing

Coon Shrimp

Coon shrimp and specifically cured and dyed coon shrimp are a staple in our bait cooler.  They are our bait of choice for both Sockeye Salmon and Summer Steelhead, and we often use them for  Spring, and Summer Chinook.  Many anglers are confused at how to go about processing their own coon shrimp, but luckily we have many over the counter ready to mix cures and brine’s that help make curing coon shrimp a consistent and easy process.  This is a very simple process, and if you have ever cured your own salmon roe you can cure coon shrimp.  Most of the available commercial egg cures will also do a fantastic job of curing coon shrimp.

Ingredients:

Pro-Cure Egg Cure (original double red hot stuff) Buy Here

Frozen Coon Shrimp ( make sure you buy good quality Shrimp)

Rock Salt

Freezer bag

Pro-Cure Slam-ola powder   Buy Here

Scents ( the sky is the limit here but my favorite are the line of Super Dipping Sauce.) Buy Here

how to cure coon shrimp
How to cure coon shrimp

Step 1: 

Fill your freezer bag with approximately 3 inches of Coon Shrimp

 

Step 2: 

Add enough cure to get a good covering of the Coon Shrimp ( 1/2 cup of cure is a good starting point)

 

Step 3:

Add 1 tea spoon of Slam-ola Powder

 

Step 4:

Refrigerate at a minimum overnight.  Your Shrimp can be fished as early as the next day, but you will get a better result by letting them cure for 3 days.

 

Step 5:

Add 1 cup rock salt.  I do this after 3 days of curing.  Adding the Rock Salt is optional, but it will toughen up you shrimp very well.  We often use Coon Shrimp for side drifting Steelhead in Hell’s Canyon and this step gives us a very durable bait.

 

Coon Shrimp
Coon Shrimp

For a chance to win a free fishing trip with us click HERE.  We select a random person from our newsletter list each and every month to win a free fishing trip with us!

How to Prepare Canned Tuna for Salmon Fishing

Many salmon anglers have come to realize the effectiveness of canned tuna as a bait source for salmon fishing.  Canned tuna, especially packed in oil, has many uses as a salmon bait.  It is often wrapped in mesh to form tuna balls, wrapped onto plugs, stuffed in Super Baits, or added to eggs as a flavor enhancer, and because canned tuna is sold in every grocery store and is transported with no refrigeration needed it is an extremely versatile and cost effective bait.  While basic tuna taken directly from the can has, and continues to be, the most used variation of the bait there are a some things we can do to make our tuna fish even better.

Myself and many other anglers throughout the northwest have discovered that there are often extra things we can do to our tuna to make it fish even better than taking it directly out of the can.  The end result is what we often call Tuna Concoctions, or mixes of scents, cures, salts, and a few other key ingredients that takes that old boring canned tuna and turns it into a very dynamic bait that can be tailored to any salmon fishing situation presented.

The following steps are just a simple version that some would consider just the tip of the iceberg when it comes to development of tuna concoctions.  The information provided here is presented in a way that might open up your mind to many possible ways to improve you salmon fishing success with the use of canned tuna.

Ingredients:

Tuna (packed in Oil)

Salt (non iodized)

Super Dipping Sauce ( My Favorite )

Measuring Spoons

Container with a lid

Can opener 

 

Step 1:

Open the can of tuna and drain off the oil.

20160414_101222.jpg

 

Step 2:

Add tuna to container (preferably one with a lid)

20160414_101551

 

Step 3:

Add salt to your tuna. The amount varies depending on time of year and where the fish are in the system.  As a general rule of thumb for Chinook it seems that the farther you get from the ocean and the warmer the water the more salt the fish crave, I often add anywhere from a tablespoon to a half a cup per can of tuna.

20160414_101705.jpg

 

Step 4:

Add scents and additives to this mixture.  A must have line of scents for me are Super Dipping Sauce scents by Money Maker Fishing.  I add a table spoon of each scent I want to use to per each can of tuna.  My all time favorite is the Garlic Super Dipping Sauce.

20160414_112924.jpg

 

 

 

 

 

Step 5:

Refrigerate overnight or place on ice.  Give this mixture time to set up and really let the scents and salts get into the tuna.  The next morning your tuna concoction will be ready to fish!

 

As you can see this is a very easy and quick process that will give your tuna an extra kick.  The sky is the limit as far as what can be added to this mixture.  Always be experimenting because you never know when you might stumble upon the cant miss recipe that fills your boat with limits.

Look for blogs in the near future that discuss how to wrap tuna on plugs, rig tuna balls, stuff / rig Super Baits, and other creative ways to fish this versatile bait.

Don’t forget to sign up for our Newsletter and enter yourself for a chance to win a free fishing trip.  We draw a random winner from our email list every July and January.

Summer Chinook and Sockeye

SUMMER CHINOOK AND SOCKEYE

Come Late June, July and early August we can be found fishing the Upper Columbia between Tri-Cities, Washington and the town of Brewster, Washington.  Summer Chinook are commonly called June hogs and are known for their size and incredible strength.  During this time of year we often have great numbers of Sockeye available. What these fish lack in size they more than make up for as table fare.   We often catch both Chinook and Sockeye on the same trip.  This is a fantastic fishery and we can’t think of a better way to spend a summer day than fishing the Columbia River for Summer Chinook and Sockeye Salmon.

 Hanford Reach

We target the Hanford Reach fishing out of Vernita Bridge and Ringold for summer Chinook and Sockeye starting the end of June.  We also offer catch and keep sturgeon fishing at this time and often do combination trips.  This is mostly an anchor fishery as we like to sit on travel lanes and wait for the waves of migrating Chinook and Sockeye to meet our gear.  The flows of the Columbia River at this time are often very high due to the early summer run off, it is this high water that makes these fish available and aggressive.  When fishing here we are looking for points and bars, or any structure that disrupts the flow of the water and creates an easier place for the fish to migrate.  These fish are constantly moving and are looking for the slower inside bends to help them conserve energy for their long migration.  It is at these congestion points that we often anchor up and deploy our gear.  This style of fishing is both very relaxing and exciting.  The Hanford Reach is a huge place and we often have large areas of river almost all to our self’s.

To see a Google Map of our meeting locations click here.

 

Wanapum Dam

Starting July 1st the Columbia River above Priest Rapids Dam opens.  Our first stop for these fish is the tail race of Wanapum Dam, it’s here that the heavy currents caused by the Dam congregates migrating Summer Chinook and Sockeye Salmon.  This is a very popular troll fishery.  When targeting Chinook we like to troll flashers and Brad’s Super Baits, Flashers and herring, and spinners.  When targeting Sockeye we fish 8 inch chrome dodgers followed by a small hoochie squid tipped with a coon shrimp.  This can be a very busy fishery, but the fishing here can be absolutely fantastic!  We typically will fish Wanapum through the 10th or so of July before moving up river.  The Sockeye and Chinook caught here during early July are some of the best table fare around!

To see a Google Map of our meeting locations click here.

 

Brewster/Wells Dam

We start fishing in the Brewster, Washington area about the 10th of July.  When fishing here we target both the Brewster Pool and the area just below Wells Dam.  We will put you on the best location to get you on a bunch of Chinook or Sockeye.  Both locations are primarily troll fisheries.  For Sockeye we like to troll 8 inch dodgers followed by a small coon shrimp, and when targeting Chinook we like to fish Super Bait’s, Herring, spinners, or plugs.  Wells Dam is much like the fishery we see at Wanapum Dam.  Lots of current and fish stacked up trying to get through the fish ladders.  One difference here is that unlike Wanapum there is a Chinook Hatchery at Wells Dam and for many fish this is the end of the line.  This means there are always fish holding here waiting to head up into the hatchery.

The Brewster Pool is very different from both Wells and Wanapum and resembles a big reservoir.  Here the current is slowed and the fishing is a little more laid back.  This is a holding area created by the warm water temperatures of the Okanogan River.  Most of the Upper Columbia River Sockeye and lots of Summer Chinook are headed up the Okanogan River to Spawning grounds in Canada and the Okanagan River Valley.  Once the water temperature hits the 70 degree mark its creates a temperature barrier for migrating Salmon.  It is once this barrier is set that the Brewster Pool becomes a salmon fishing paradise.  Tens of thousands of Chinook and Sockeye hold here waiting for the temperature in the Okanagan River to cool enough to allow safe passage.  Quick limits of Sockeye and multiple hookups on great fighting Summer Chinook are the norm.  We offer both full and half day trips in this area and often run a full day followed by a half day afternoon trip.

To see a Google Map of our meeting locations click here